Commodore Strut Brace

[Fulcrum]

Fulcrum Performance Bars

SELECTED COMMODORE BARS ONLY $82.50 INC GST
--- OVER 50% DISCOUNT OFF RRP ---

LIMITED TIME ONLY

Complete your Commodore Suspension Enhancement

• Provide maximum chassis stiffness on front towers
• Offer more than just appearance, provides reduction in chassis flex to allow the suspension to do its job properly
• Helps maintain wheel alignment settings during hard cornering loads
• Complement SuperPro Polyurethane Bushings for better handling and reduced tyre wear
• Suitable for race/track or normal street use - supports strut towers from moving, reduces top mount distortion, and helps avoid tower collapse.


Part # Description

FPB-001 Brace- Strut Tower Commodore VB-VP
FPB-002 Brace- Strut Tower Commodore VB-VP V8
FPB-003 Brace - Strut Tower Commodore VR-VS
FPB-004 Brace- Strut Tower Commodore VT-VY Series 1

Contact your local Fulcrum Branch for these quality parts

Stafford
46 Webster Road,
Stafford Qld 4053 - 07 3356 6733
M-F 8am - 5pm

Capalaba
2/41 Neumann Road,
Capalaba QLD 4157 - 07 3390 3900
M-F 8am - 5pm
SAT 8am - 12pm

Hillcrest
2/108 Anzac Avenue Corner Tradelink Road,
Hillcrest QLD 4118 – 07 3800 7306
M-F 8am - 5pm

Yeerongpilly
760 Fairfield Road,
Yeerongpilly QLD 4105 - 07 3848 5644
M-F 8am - 5pm
SAT 8am - 12pm


www.fulcrumsuspensions.com

[Darren]

thats a bargain, might pick up one for the VH me thinks :)

[drunk_kev]

thats a bargain, might pick up one for the VH me thinks :)

i'm thinking the same thing.... they usually go for over $100 2nd hand on eBay

[hsvstatesman]

Is there a branch in Warwick or Toowoomba

[BrAdAsS]

whats the fulcrum brace look like?
Is it polished or powder coated?
Does it curve around to give access to the brake reservoire?

[Fulcrum]

Branch times now edited into original post, as well as pics added :)

[Fulcrum]

Is there a branch in Warwick or Toowoomba

Hey ,

We do not have a Fulcrum Branch in Toowoomba, However we do have a Fulcrum Dealer out there,

Toowoomba Steering Service
8 Neil Street, TOOWOOMBA
07 4639 2824 - Dennis

[VS_Pete]

Branch times now edited into original post, as well as pics added :)

Thank you.:)

[BrAdAsS]

Do you have a pic of one fitted to a vx?

I run a 12mm Mace Engineering intake-spacer which takes up alot of the clearance between the top of the plenum and bottom of the current whiteline brace.. Just trying to find out if that bar is more practical than the whiteline bar that goes directly over the brake reservoire and that I would have enough clearance with the spacer...

Its been buggin me for a while, if that bar fits, it gives me something to put on the todo list...

Due to the existing whiteline brace, does the fulcrum brace use the same mounting holes or does it require additional holes...?

[Darren]

Looking at the picture, that strut brace won't fit over my intake manifold.

Do you guys also sell those strut braces that run behind the engine (along the firewall) rather than over the top of the engine - refer pic below


http://images.channeladvisor.com/Sell/SSProfiles/82000081/Images/6/KSB501A.jpg

[Fulcrum]

Hey Darren,

We have one avail for the earlier models that runs around the back, along the firewall. The picture is one fitted to a V6 VS.

Are you located in Brissy?? Pop into on our our branches, we will confirm it fits before you leave with one! :)

Thanks Jemma

[Darren]

thanks Jemma,
I live in Toowoomba, but often end up in Brisbane. Might drop by the Stafford store and try one for size :)

[bigafoot]

just got a question, what sort of price can you do for a set of lowered spring (still legal height) brushes shock etc. front and rear for HQ coupe. I know its not a commodore but we are looking around for some prices..

[Ben]

im keen for a strut brace.... is this deal open to the public, or do i need to mention im from bccc ???

also, id need one that goes along the firewall as well, VS V6, cause im not sure if it would interfer with my turbo set up when it goes on. so rather be safe then sorry

[Fulcrum]

Hey Ben,

If you are buying anything other than a strut brace, please mention that you are from BCCC.

Please see pic - this is the brace on a vs commodore

[Fulcrum]

Hey Bigafoot, Please contact your closest branch for this quote :)

Thanks!!

[VS_Pete]

From what I have been told offer may be off now.

[Carbon]

I'm pretty sure the deal was for Nov and Dec

[VS_Pete]

Stafford didn`t know anything about it Adam but they are going to check for me.

[VS_Pete]

First post LIMITED TIME ONLY.
No date.?????

[Carbon]

See the banners that change as you change pages. Keep an eye out for the fulcrum one that states the special and Nov-Dec

[Carbon]

as in this one
314

[VS_Pete]

Thanks Adam, only just going by what I was told today.

Mybe people at the top in Fulcrum need to tell their branchs what promotions are on and the dates involved I shouldn`t have to look at a banner for hours just to see if discounts are on.
It should have been in the ad in the first post.
I`m glad you told me I didn`t see it.
Just as I asked for hours of business to be displayed and someone said do a google search.
Hello I am a customer and I don`t want to look for hours for work hours or have to ring up.

[Fulcrum]

Hey Vs Pete,

Sorry this information was not in the original post. Also, all branches and staff were advised on this special and dates, so I am unsure why the sales person you spoke to didn't know - I am looking into this.

Also, I added branches hours into orignal post a while ago after I received a request for this :)

Let me know if there is anything else I can help you with

[VS_Pete]

Thank you for the reply. No problems. I`m getting work done on my car it goes in today.
I`m sure I will be able to give better feedback after the work is done.
Regards Peter.

[Mad_Car]

Hi Jemma,

ive got a VL Commodore sedan, im currently looking for a strut brace, are the ones that run along the firewall all you have for the VL's. as long as it fits thatsfine,

big question, how quik can u get it to Victoria, need one ASAP!

thanks
Ben

[EQUIPE-T]

Hi Jemma,

ive got a VL Commodore sedan, im currently looking for a strut brace, are the ones that run along the firewall all you have for the VL's. as long as it fits thatsfine,

big question, how quik can u get it to Victoria, need one ASAP!

thanks
Ben

your proberly going to have to contact a fulcrum up here mate ( i suggest the stafford one, very good customer servise from what iv experienced )

[Mad_Car]

Rang Stafford store today, they put me on to the Preston store down here, spoke to Mark, which he then asked a few questions ect and said the price was fine by the boss ect, he just had to find out about some other info for me... gave him a couple hrs and called back and got hold of Tony, who mark had spoken to about it., and now its on its way! will be at my door between 8-12 tomoro morning..

thanks guys :)

[VS_Pete]

Nice work.

[Mad_Car]

Well strut brace arrived today, just walked in the door to it sitting in my room..

thanks Fulcrum :)

[Mad_Car]

Fitted the strut brace yesterday, there was a instant difference and feels great! very very very happy with this product and service..

thanks :)