vn v6 fault codes

[stealthvn/mr vr ss]

V6

Code 12 - System Pass (OK)

Code 13 - Oxygen Sensor (O2)

Code 14 - Coolant temperature Sensor - Voltage Too Low

Code 15 - Coolant temperature Sensor - Voltage Too High

Code 16 - Coolant Temperature Sensor - Voltage Unstable

Code 17 - PCM Coolant Temperature Circuit

Code 19 - Throttle Position Sensor

Code 21 - Throttle Position Sensor (TPS) - Voltage Too High

Code 22 - Throttle Position Sensor (TPS) - Voltage Too Low

Code 23 - Mass Air Temp Sensor (MAT) - Voltage Too High

Code 24 - Vehicle Speed Sensor (VSS)

Code 25 - Mass Air Temp Sensor (MAT) Sensor or Circuit - Voltage Too Low

Code 26 - Mass Air Temp Sensor (MAT) Sensor or Circuit - Voltage Unstable

Code 28 - Transmission Problem

Code 31 - Theft Deterrent System - Missing Signal

Code 32 - Manifold Airflow (MAF) Sensor or Circuit

Code 33 - Manifold Absolute Pressure Sensor (MAP) - Voltage Too High

Code 34 - Manifold Absolute Pressure Sensor (MAP) - Voltage Too Low

Code 35 - Idle Speed Error

Code 36 - Vacuum Leak

Code 41 - Crank Angle Sensor

Code 42 - Electronic Spark Timing Circuit (EST)

Code 43 - Knock Sensor Circuit

Code 44 - Oxygen Sensor Lean (O2)

Code 45 - Oxygen Sensor Rich (O2)

Code 51 - Memcal Unit - Check for bent pins

Code 52 - CALPAK Unit - Check for bent pins

Code 53 - System Over-Voltage - Alternator produced > 17.1 Volts for more than 2 seconds

Code 55 - ECM - Check ECM Grounds or excessive input voltage

[Andrew]

can anyone tell me how to check the fault codes please.

[stealthvn/mr vr ss]

is it for a vn?

[Andrew]

yes it is. 88 model, v6.

[customcalais]

yes it is. 88 model, v6.

ultratune marsden check mine for free usually or most places charge $20 for their time.
whats up with it?any warning lights coming on?
V

[VS_Pete]

Have a look here Andrew.
It`s got pics.

http://forums.justcommodores.com.au/holden-commodore-how-tos/22307-checking-error-codes-vr-vs-revised.html